Skip to content

Withdrawals

This guide will demonstrate how to withdraw 1 Ether from Optimism (OP Mainnet) to Mainnet.

Overview

Withdrawals on the OP Stack are a two-step (plus one) process. The process involves:

  1. Initiating the Withdrawal Transaction on the L2,

Wait one hour (max) for the L2 Output containing the transaction to be proposed.

  1. Proving the Withdrawal Transaction on the L1,

Wait the 7 day finalization period

  1. Finalizing the Withdrawal Transaction on the L1.

Withdrawal complete!

Here is a complete end-to-end overview of how to execute a withdrawal. Don't worry, we will break it down into Steps below.

withdrawal.ts
import { getWithdrawals } from 'viem/op-stack'
import { 
  account, 
  publicClientL1, 
  walletClientL1,
  publicClientL2, 
  walletClientL2 
} from './config'
 
// Build parameters to initiate the withdrawal transaction on the L1.
const args = await publicClientL1.buildInitiateWithdrawal({
  to: account.address,
  value: parseEther('1')
})
 
// Execute the initiate withdrawal transaction on the L2.
const hash = await walletClientL2.initiateWithdrawal(args)
 
// Wait for the initiate withdrawal transaction receipt.
const receipt = await publicClientL2.waitForTransactionReceipt({ hash })
 
// Wait until the withdrawal is ready to prove.
const { output, withdrawal } = await publicClientL1.waitToProve({
  receipt,
  targetChain: walletClientL2.chain
})
 
// Build parameters to prove the withdrawal on the L2.
const proveArgs = await publicClientL2.buildProveWithdrawal({
  output,
  withdrawal,
})
 
// Prove the withdrawal on the L1.
const proveHash = await walletClientL1.proveWithdrawal(proveArgs)
 
// Wait until the prove withdrawal is processed.
const proveReceipt = await publicClientL1.waitForTransactionReceipt({
  hash: proveHash
})
 
// Wait until the withdrawal is ready to finalize.
await publicClientL1.waitToFinalize({
  targetChain: walletClientL2.chain
  withdrawalHash: withdrawal.withdrawalHash,
})
 
// Finalize the withdrawal.
const finalizeHash = await walletClientL1.finalizeWithdrawal({
  targetChain: walletClientL2.chain,
  withdrawal,
})
 
// Wait until the withdrawal is finalized.
const finalizeReceipt = await publicClientL1.waitForTransactionReceipt({
  hash: finalizeHash
})

Steps

1. Set up Viem Clients

First, we will set up our Viem Clients for the Mainnet and Optimism chains, including the necessary extensions for the OP Stack.

We will need the following clients:

  • publicClientL1/walletClientL1: Public & Wallet Client for Mainnet
  • publicClientL2/walletClientL2: Public & Wallet Client for OP Mainnet

We will place these in a config.ts file.

config.ts (JSON-RPC Account)
// Import Viem modules.
import { createPublicClient, createWalletClient, custom, http } from 'viem'
import { mainnet, optimism } from 'viem/chains'
import { publicActionsL1, walletActionsL1, walletActionsL2 } from 'viem/op-stack'
 
// Retrieve Account from an EIP-1193 Provider. 
export const [account] = await window.ethereum.request({ 
  method: 'eth_requestAccounts' 
}) 
 
export const publicClientL1 = createPublicClient({
  chain: mainnet,
  transport: http()
}).extend(publicActionsL1())
 
export const walletClientL1 = createWalletClient({
  account,
  chain: mainnet,
  transport: custom(window.ethereum)
}).extend(walletActionsL1())
 
export const publicClientL2 = createPublicClient({
  chain: optimism,
  transport: http()
})
 
export const walletClientL2 = createWalletClient({
  account,
  chain: optimism,
  transport: custom(window.ethereum)
}).extend(walletActionsL2())

2. Initiate Withdrawal

Next, we will initiate the withdrawal transaction on the L2 by building the parameters on the L1 (1), and then executing the transaction on the L2 (2). We also want to wait for the L2 transaction to be processed on a block (3) before we continue.

In the example below, we are initiating a withdrawal for 1 Ether from the L2 (OP Mainnet) to the L1 (Mainnet).

withdrawal.ts
import { 
  account, 
  publicClientL1,
  publicClientL2, 
  walletClientL2 
} from './config'
 
// 1. Build parameters to initiate the withdrawal transaction on the L1.
const args = await publicClientL1.buildInitiateWithdrawal({
  to: account.address,
  value: parseEther('1')
})
 
// 2. Execute the initiate withdrawal transaction on the L2.
const hash = await walletClientL2.initiateWithdrawal(args)
 
// 3. Wait for the initiate withdrawal transaction receipt.
const receipt = await publicClientL2.waitForTransactionReceipt({ hash })

3. Prove Withdrawal

After the initiate withdrawal transaction has been processed on a block on the L2, we will then need to prove that withdrawal on the L1.

Before a withdrawal transaction can be proved, the transaction needs to be included in an L2 Output proposal. Until then, we will need to wait for the withdrawal transaction to be ready to be proved (1). This usually takes a maximum of one hour.

Once the L2 output has been proposed, we will need to build the parameters for the prove withdrawal transaction on the L2 (2), and then execute the transaction on the L1 (3). We also want to wait for the L1 transaction to be processed on a block (4) before we continue.

withdrawal.ts
import { 
  account, 
  publicClientL1,
  publicClientL2, 
  walletClientL1,
  walletClientL2 
} from './config'
 
// (Shortcut) Get receipt from transaction created in Step 1.
const receipt = 
  await publicClientL2.getTransactionReceipt({ hash: '0x...' })
 
// 1. Wait until the withdrawal is ready to prove.
const { output, withdrawal } = await publicClientL1.waitToProve({ 
  receipt, 
  targetChain: walletClientL2.chain 
}) 
 
// 2. Build parameters to prove the withdrawal on the L2.
const args = await publicClientL2.buildProveWithdrawal({ 
  output, 
  withdrawal, 
}) 
 
// 3. Prove the withdrawal on the L1.
const hash = await walletClientL1.proveWithdrawal(args) 
 
// 4. Wait until the prove withdrawal is processed.
const receipt = await publicClientL1.waitForTransactionReceipt({ 
  hash 
})

4. Finalize Withdrawal

When the withdrawal transaction has been proved, we will then need to finalize that withdrawal on the L1.

Before a withdrawal transaction can be finalized, we will need to wait the finalization period of 7 days (1).

After the finalization period has elapsed, we can finalize the withdrawal (2).

Once the withdrawal has been successfully finalized (3), then the withdrawal is complete! 🥳

withdrawal.ts
import { getWithdrawals } from 'viem/op-stack'
import { 
  account, 
  publicClientL1,
  publicClientL2, 
  walletClientL1,
  walletClientL2 
} from './config'
 
// (Shortcut) Get receipt from transaction created in Step 1.
const receipt = 
  await publicClientL2.getTransactionReceipt({ hash: '0x...' })
 
// (Shortcut) Get withdrawals from receipt in Step 3.
const [withdrawal] = getWithdrawals(receipt)
 
// 1. Wait until the withdrawal is ready to finalize.
await publicClientL1.waitToFinalize({ 
  targetChain: walletClientL2.chain, 
  withdrawalHash: withdrawal.withdrawalHash, 
}) 
 
// 2. Finalize the withdrawal.
const hash = await walletClientL1.finalizeWithdrawal({ 
  targetChain: walletClientL2.chain, 
  withdrawal, 
}) 
 
// 3. Wait until the withdrawal is finalized.
const receipt = await publicClientL1.waitForTransactionReceipt({ 
  hash 
})